Bürkert debi metre su All models error codes
Codes
- 01-803Error codeNPN connec- 8032 tion: 4 3 controller 5 8032 (NPN/ 1 2 Solenoid valve + PNP version) - to a solenoid 1A Protection 24V, 700mA valve 6014. circuit * + - 24 V=
- 4-20Error code4-20mA input at external instrument Power supply 300 mA + + - - 12-36 V DC (*) SOURCE SINK Without PE Relays IoutNC L+L+ L-L- PEPE P-P- P+P+ With 12S.u.3p6pVlydc OPUUTLPSUET FLOW SENSOR COIL NPN
- 12-36Error code• filtered and regulated • SELV circuit (safety extra low voltage), with a safe energy level • oscillation rate: ±10 %
- DC300Error codeWiring of the pulse output in PNP mode Power supply 12-36 V DC 300 mA + 5-36 V DC + - - PLC + (*) - Without PE Relays IoutNC L+L+ L-L- PEPE P-P- P+P+ With 12S.u.3p6pVlydc OPUUTLPSUET P- P+ FLOW SENSOR 8025: COIL NPN PNP
- ply300Error codeWiring of the current output in sinking mode 4-20mA input at exter- nal instrument Power supply 300 mA + + - - 12-36 V DC (*) Iout Source/Sink selector (see chap. "8.3.2") SOURCE SINK Without PE Relays IoutNC L+L+ L-L- PEPE P-P- P+P+ With 12S.u.3p6pVlydc OPUUTLPSUET FLOW SENSOR COIL NPN
- S020Error codeS030 sensor-fitting Flow rate gpm m 3/h 1000 l/min 3000 200 500 2000 100 DN65 DN50 (DN65)* 1000 200 50 DN40 (DN50)* 500 DN32 (DN40)* 100 20 DN25 (DN32)* 50 200 DN20 (DN25)* 10 100 DN15 (DN15 / DN20)* 20 5 50 10 2 DN08 Example 5 20 1 DN06 10 2 0.5 5 1 0.2 0.5 2 0.1 1 0.2 0.05 0.5 0.1 0.02 0.05 0.2 0.01 0.1 0.3 0.5 1 3 5 10m/s 0.3 0.5 1 3 5 10 30 fps Flow velocity Example: • Specification: if the nominal flow rate is 10 m3/h, the ideal flow velocity is between 2 and 3 m/s. • Solution: intersection between flow rate and flow velocity in the graph gives the appropriate pipe diameter, DN40 (or DN50 for the asterisked fittings)
- V032ParameterIf the current output is wired, remove the jumper wire between the terminals Iout and L+