Blomberg All models error codes
Codes
- E01Error codeDoor lock fault - machine not detecting the door is closed and locked
- E02Error codeHeating fault - water not reaching target temperature
- E03Error codeDrain fault - machine unable to drain water within the expected time
- E04Error codeWater inlet / fill fault - machine not filling within the expected time
- E05Error codePressure switch fault - water level sensor reading incorrectly
- E06Error codeNTC thermistor fault - temperature sensor not reading correctly
- E07Error codeMotor or triac fault - motor circuit fault
- E08Error codeMotor fault / tachometer error
- E09Error codeDoor interlock fault - variant code
- E10Error codeDoor lock or control fault
- E11Error codeMotor fault or unbalanced load detected during spin
- E13Error codeWater leak detected (anti-flood / Aquastop)
- E17Error codeMotor fault / inverter board fault on Optima Inverter Motor models
- H1Error codeNTC thermistor open or short circuit
- H2Error codeHeater detected open circuit - failed heating element
- H3Error codeHeater detected stuck on / heater triac short circuit
- H4Error codeInlet valve triac short circuit
- H5Error codePump open circuit - failed drain pump or wiring fault
- H6Error codeMotor triac short circuit
- H7Error codePressure sensor failure
- H8Error codeTachometer / motor speed sensor fault
- H11Error codeMotor or tachogenerator open circuit