Alpine endüstriyel öğütme makinesi All models error codes
Codes
- 6Error codeFault code (6th)
- 7Error codeis ON continuously • LED display
- 8Error codeOutdoor FAN RPM
- 9Error codeTa (Outdoor Air Temperature)
- 55Error codeThis error indicates the equipment is experiencing frequent high discharge temperature faults. Control has determined continued operation is acceptable. This indicates they may be a problem with the equipment
- 57Error codeThis indicates the control is sensing sweating on the cooling loop
- B0Error codeThe estimated airflow from indoor subsystem is near to 0 CFM
- b1Error codeBLOWER MOTOR COMMUNICATION ERROR
- b3Error codeBLOWER MOTOR OPERATING IN POWER, TEMP. ,OR SPEED LIMIT
- b5Error codeBLOWER MOTOR ROTOR LOCKED
- B9Error codeEstimated airflow from motor is lower than the airflow requirement
- D0Error codeControl board does not have the necessary data for it to properly perform its functions
- D1Error codeControl board does not the appropriate data needed to properly perform its functions
- D2Error codeThe airflow requirement is greater than the airflow capability of the indoor subsystem
- D3Error codeThere is a mismatch between the shared data and the control physical hardware
- D4Error codeThe Bluetooth® Shared Data Loader BTSDL01 data has been rejected
- H1PError code
- H2PLED code1 Flash
- H3PError code1 Steady Flash
- MDError codeCurrent system operational Mode (cooling, cooling startup, heating, heating startup, oil return, defrost, stop)
- onError codeboard electric heat connector. Voltage should mea
- S2803Error codeSolenoid Valve O/S Single Acting (ARO)