29Fs140 All models error codes
Codes
- 2-1Error code6. Move the defl ection yoke forward, and adjust so that the entire screen becomes green. 7. Switch over the raster signal to red, then blue and confi rm the condition. 8. When the position of the defl ection yoke is determined, tighten it with the defl ection yoke mounting screw. 9. If landing at the corner is not right, adjust by using the disk magnets. Purity control corrects this area. Disc magnets or rotatable disc magnets correct these areas (a-d). b a c d Deflection yoke positioning corrects these areas. b c a d
- ESS50Error code4. Connect oscilloscope to pin 2 (B output) of CN004. 5. Access service menu, then press 1 or 4 to select SA “SHUE” and YC 013 “TINT”, then adjust VB1= VB2 = V pressing 3 or 6. 6. Press MUTING then 0 to write into memory. 7. Select TV channel with NTSC 3.58 and repeat steps 3 8. For single system model with NTSC 4.43, select TV ch NTSC 4.43 and repeat steps 3-7. 9. Once adjustment is completed in Video mode, repeat t adjustment in DVD mode. Set TV to DVD mode. Input Color Bar (CB). 10. Connect oscilloscope to pin 2 (B output) of CN004. 11. Access service menu, then press 1 or 4 to select YC then adjust VB1= VB2 = VB3 = VB4 by pressing 3 or 6
- ory343Error codeNo.
- VR2Error codeTLV1 (no need to adju